Vehicle-mounted automatic inflatable travel mattress for off-road vehicles

Description

Inflatable Outdoor Camping Mat Self Inflating Air Mattress Sleeping Pad Air Bed Joinable With Pillow
Made of high resilience foam, this self-inflating mat offers great sleeping comfort at camping site. With PVC coating, the mat is durable and water resistant and suitable for all ground surfaces. With joinable buttons on the sides of the mat allowing you to join 2 pcs or more mats together to form a bigger mattress. Equipped with an efficient self-inflating valve at the end of the mat, it only takes a few minutes to inflate. External material: 190T Polyester PVC coat Internal material: High density breathable foam Big valve at the end of the mat for automatic self-inflation Built-in blow-up pillow (The pillow needs to be blown artificially） 1. Size:180*132*3cm/75.6*51.9*1.2in 2. Size：180*130*5cm/75.6*51.9*2in
Weight:2300G/5.07lb package size: 60*12cm/23.6*4.7in How to inflat the mat: 1) Open the valve at the end of the mat 2) Leave it for 3-5 minutes (It will take hours to inflate totally for the first use) 3) Wait until the mat be fully inflated 4) Close the valve at the end of the mat 5) Open gas tap on the pillow,blow to your desire thickness while pinching the bottom of gas tap into an eclipse shape 6) Close the tap on the pillow How to deflate the mat: 1) Open gas tap on the pillow,expel the air while pinching the bottom of gas tap into an eclipse shape 2) Close the tap on the pillow 3) Open the valve at the end of the mat 4) Roll the mat from one end to the other end , queeze out air, close the valve(repeat above steps it will be smaller) 5) Clip on the strip
Matters Needing Attention *As the sleeping pad is folded in compressive package, the sponge needs a few hours to recover its shape for the first use, and you need to spread the pad, unscrew the valve and screw it up until the pad inflates totally. Fold the pad repeatedly, then unscrew the valve again to let it continually inflate automatically. *The pillow needs to be blown artificially.Please pinch the bottom of gas tap into an eclipse shape to expand the gap when blowing & deflating. *make sure no sharp stuff underneath when using *far away from: flame, high temperature, long time sunshine *storage: keep inflated and cool Notice * Please allow slight measurement deviation for the data. * The actual color may vary slightly from the online image due to monitor color settings.