Special sale 36" Lightweight Cast Iron Camelback Straight Edge Raw Casting.

Description

36" Lightweight Cast Iron Camelback Machinist's Straight Edge Featherweight design.  These castings weigh about 27.5 pounds as cast and can be machined to between 25 pounds and 19 pounds depending on purchaser's preference.  As cast, the sole has about 1/8" up and down bow in it it simply due to the way the metal solidifies in the mold.
The blue-painted straight edge shown in the pictures above is my personal straight edge and does not show the appearance of the raw casting I am selling nor of the machined straight edge.
However it does show how nice a little bit of grinding and some paint can make one of these castings look!  Several of the photos do show the raw casting.
Dimensions:  36.5" L  6.5" H  3" W
My 36" straight edge is a proven (I have been selling these essentially by word of mouth til now to amateur and professional scrapers) uniquely designed lightweight rigid grey cast iron metrology tool.  It weighs about half that of other 36" straight edges and yet offers better rigidity and more versatility than any other straight edge.  Its broad sole is designed to reach under vee ways and other features though it is not intended to be used as a prism.  Feedback from my customers has been strongly positive.  They can use this light straight edge all day and not be worn out hoisting a "boat anchor" to and from the machine.  this is especially true on vertical ways.
I designed this straight edge and I personally cast each and every one in my own foundry using commercially sourced grey 40 cast iron feedstock.  Each casting is carefully inspected and hardness tested on calibrated industrial equipment to insure an excellent and uniform void-free scraping surface.  Every casting is properly thermally stress relieved prior to shipment.  The quality of these castings is second to none.  I guarantee it.
I have carefully tested the stiffness of my design and found that it deflects less than a ten thousandth of an inch when supported at each end and loaded with 30 pounds at it center as shown in one of the photos.
Casting are supplied either as raw castings or machined.  Raw castings have had gates and risers cut off and parting lines coarsely smoothed and any flash knocked off but are otherwise as the come from the mold.  Machined castings are cut on a 20 ton horizontal boring mill with flatness of .003 or better.  (Every one I have done to date has been better than .003, but I like to provide a little leeway.)
Local pickup is ideal, but if castings have to be shipped they are securely boxed in a fitted wood box.  Ground shipping within the US costs 50 dollars.  I ussualy ship within 1 working day of receiving payment for an order.  I have straight edges currently in stock ready to ship.
If you have any questions please contact me for clarification.
These casting are not machined nor are they precision scraped.  You can buy one and have it machined and then scrape it.  I do provide a very economical machining (but not scraping service) if so desired.  Contact me prior to purchase or see my other listing for a machined casting in stock.
Pricing:
Raw casting            340 USD
Shipping                  50 dollars within the US and Puerto Rico.  At cost to Canada
I Usually ship within one day of completion of sale.
Denis Foster
FedEx, UPS, USPS Shipping available
I would accept a return
within the US
if the casting is substantially defective.  Returns not accepted simply for changing your mind.